Once running toilet you have done all you can do it's time to call in the professionals. Experts dealing with water damage restoration are equipped with the equipment, experience and knowledge to be able to spot problem areas and address them right away. You should get in touch with them and arrange a visit as soon as possible. Let them know if the water is still present and how much you have been able to do. That will allow them to fit you into their schedule should your situation be urgent. Clearing water quickly is important so that mold and spores do not have a chance to take root and begin growing. This mold can cause respiratory and other serious health problems.
With a putty knife, carefully scrape the remaining parts of the wax ring from the area. Clean the spot so that the new wax ring will be level. Place a new wax ring on the opening and replace the toilet. Bolt it back onto the floor, reconnect the water line repair supply tube and watch for leaks as the water is turned back on.
When trying to locate a plumber, be sure they have had proper training. There are three types of plumbers and they are classified by the amount of training they have. An apprentice plumber receives training through a local union. They follow an apprenticeship program for about three or four years. They learn through on-the-job training and some classroom structure. An apprentice plumber does get paid for on-the-job training.
Dirty waste water, after all, leaves your house following the law of gravity. Waste water goes downward to the sewer or septic tank, nice and easy. Behind this simple rule is the multitude of vents and traps to keep the process of waste removal possible. Vents allow air to fill drainpipes, precious air that allow waste water outflow. Traps are those curved S-shaped sections of the pipes under the sink drain. Traps perform a crucial role in forcing most of the water through the drainpipe, but leaving some to seal the area and prevent sewer gas from backing up.
Be certain that the bathroom exhaust fan vents to the outdoors, not into the house or attic. If the exterior vent dampers don't operate properly or water line repair don't seat well have them fixed or replaced.
The way a toilet plunger works is by filling up with water and then pushing that water through the stopped up drain. When unclogging a clogged toilet, the idea is to plunge up and down a couple of times so the plunger fills with water and then jam the open end, sometimes called a force cone, into the waste outlet in the plugged toilet and start plunging. You may have to pump the plunger up and down several times to clear the blockage.
Then, you can take your new shower parts home and reinstall them in the inner assembly. It is very important that everything be aligned properly and tightened to prevent leaks. Beware of over tightening, however, since this can also cause problems. Once you are sure everything is installed properly, replace the cover plate and turn the water back on to test your repair work. With a little bit of work, your do-it-yourself shower repair project can be a success. It does not take an expert, just a little effort and know how.